Many disputes over freelance video begin not with poor editing, but with poorly defined agreements. “I’d like to make some tweaks” turns into a 4th round of revisions, the invoice becomes due after 60 days and no one knows who gets the final file. Before importing a single piece of footage, a signed contract will resolve these issues.
This post offers a real (fill-in-the-blank) contract that you can print out and use now. Below this, I’ve walked through each provision explaining why it was included and how you may want to modify it to suit your own needs. The contract provided below is intended for freelance editors and those who employ or commission them.
The template/contract and accompanying article is informational content, NOT LEGAL ADVICE. Review your final version by an attorney practicing in your state/country.
Why a Freelance Contract Matters: Protecting Freelance Workers and Contract Workers

There is nothing wrong with a verbal agreement until the two parties have their first disagreement. That is when they turn to writing the terms of the agreement. Essentially, a contract is merely an objective third party’s written evidence of what both parties already verbally agreed upon.
You should realize that avoiding contracts is not speculative. In 2022, a survey conducted by Freelancers Union in collaboration with its partner creators reported that 62% of freelance workers based in New York lost wages at least one time during their careers due to employers refusing to pay them. Further, according to the same report, 53% of New York freelancers reported losing at least $10,000 from non-payment for completed work. While the study referenced above is limited to freelance workers in New York across multiple creative disciplines and not specifically video editors, most freelance video editors will recognize the pattern of behavior illustrated by such a study.
Contracts help in four specific ways:
- They define what constitutes a job; therefore, any additional work performed beyond the scope of the original contract may be billed to the client rather than being taken without compensation.
- They set forth the rules governing payments and provide consequences for delayed payment.
- They settle questions regarding ownership of intellectual property created for clients (e.g., “who has the right to publish” etc.) prior to any potential disagreements arising among the parties involved.
- They allow both parties to have an orderly termination of an assignment, thus preventing a canceled project from resulting in loss of monthly income.
Essential Terms: Using a Standard Freelance Contract Template for Creative Freelance Work

Before we go deep on each clause, here is the whole structure at a glance. Every row maps to a numbered clause in the downloadable template.
Clause | What it does | What goes wrong without it | Who it mainly protects |
Scope of services | Lists exactly what work is included | Endless extras at no charge | Editor |
Deliverables and specs | Fixes length, format, resolution, platform | Wrong aspect ratio, re-exports, disputes over “done” | Both |
Client responsibilities | Sets who supplies footage, assets and feedback | Delays blamed on the editor | Editor |
Revision cap | Limits free rounds and defines a round | Unlimited rework | Editor |
Payment terms | Deposit, due dates, late fee | Slow or missing payment | Editor |
Kill fee | Pays for work done and reserved time if cancelled | Project vanishes with no compensation | Editor |
IP transfer | Moves ownership to the client on payment | Unclear who owns the final video | Client |
Confidentiality | Protects unreleased footage and plans | Leaks of launches, scripts, pricing | Both |
Termination | Defines how either side can exit | Stalemates and unpaid limbo | Both |
You will notice most rows protect the editor. That is deliberate, because the editor carries most of the financial risk in a creative engagement. The clauses that protect the client, IP transfer and confidentiality, are the ones brands care about most when they hire.
When independent creators operate a sustainable freelance business, adopting a customizable freelance contract template provides immediate structural clarity before any post-production work begins. Utilizing a vetted free template to establish a solid contract ensures that both the freelancer and the corporate hiring entity share aligned expectations across the active contract period. Entering into a binding, comprehensive agreement protects vital intellectual property rights while establishing an explicit termination clause. By laying out transparent contract terms from day one, creative leads guarantee timely payment and establish a professional working relationship that eliminates misunderstandings regarding final asset ownership.
As SitePoint’s list of clauses to include in a freelance contract shows, the same core set appears across freelance work generally: kill fee, independent contractor status, confidentiality, warranty, and ownership. Video adds its own details, such as formats, revision rounds and music licenses, which is where the template goes deeper.
Defining Scope: Outlining Boundaries for Each Freelance Project and Freelance Talent
This is probably the section of the contract that makes all other sections worthwhile. What does the editor get paid for?
“Editing our video,” isn’t a scope. What will be included in the editing services? How many videos are there? Are they short-form/long-form? Where will they be posted? Is captioning included? Will they need to have color correction done? Do they require motion graphics or sound design? Is vertical cutting included for social media postings?
If any of these aren’t listed under the scope, they won’t be included.
Under the template, the scope portion of the contract references Schedule A, which is a table listing all deliverables along with their dimensions, formats, resolutions, and deadlines. Listing these items in a schedule versus including them in the body of the contract has a few practical benefits. For example, using this same contract repeatedly (for example, by changing only the schedule) could save time.
Acceptance of Deliverables
After defining what “done” means, we then define how “done” is approved. In the template, a deliverable is considered accepted when it receives written approval from the client or five business days after no additional comments were received. It is very important to include this acceptance criteria so that projects do not remain open indefinitely.
There are two things to easily overlook:
- Raw Project Files: Source files (and/or timelines) unless specifically noted otherwise in Schedule A belong to the editor. If a client wants to allow another editor to complete the project, this needs to be negotiated prior to completion and may cost an additional fee.
- Changes Outside the Contracted Scope: Any changes to the original contracted scope, as outlined in Schedule A, will receive a written quote prior to commencing work. As long as there was an email approving of the change, this can serve as adequate documentation. I would argue that implementing this simple habit is the best way to defend yourself against scope creep.
Related Clause: Client Responsibilities
Client responsibilities should immediately follow scope as it outlines what responsibilities fall to the client (such as providing footage/scripts/music choices, etc.), defines one approver for each deliverable, and allows for rescheduling deliveries based upon delays in receipt of materials. Without this clause, any delay in a project is typically attributed solely to the editor.
Revision Limitations
Revisions are where good-will disappears. When clients see unlimited revisions in a quote, they hear an invitation. When editors agree to unlimited revisions, they feel threatened.
The solution is to limit revisions and clearly outline what constitutes a round. The template includes two revisions per deliverable and defines a round as one consolidated set of written feedback from one approver provided together within five business days after receiving the draft.
Each aspect of the above definitions is working towards a goal:
- Consolidating feedback prevents the drip effect of “one more thing” messages.
- Having one approver prevents conflicting feedback from different stakeholders (i.e. marketing lead vs. founder).
- Feedback windows keep projects moving.
- An additional clause outlining extra rounds provides pricing options (hourly or flat rate) and requires a written approval prior to commencing any additional work.
Additionally, the template creates distinction between revisions and re-edits. Shortening a shot, correcting a lower third, or adjusting color is a revision. Changing the overall structure of the video to accommodate a new concept is a change request. By spelling this out, you can now tell a client yes to their new idea without quietly accepting it as part of the initial fee.
While two rounds is a commonplace default, there is no rule. Place the number of rounds appropriate for your process within the contract and adhere to it.
Payment Terms
Payment terms define the conversion of your price into cash flow. They contain four parts. (The scope clause above is the one that stops the work growing after the price is fixed – we broke that down separately in where scope creep starts in a video project.)
1. A deposit. The template requests 30%, upon signature of contract and work commences once this has been received. Deposits filter out clients who do not intend to proceed, and provide financial protection in case a project fails. Beancount’s guidelines regarding kill fee clauses and deposits suggest booking an engagement with a 25 to 50% deposit; then, through milestone-based payments, paying the editor for work progressing toward completion. The level of deposit required is a business decision, not a legal requirement.
2. Clearly defined due dates. Net 14 days from the date of invoicing is used in the template, and our guide to client billing for video agencies covers how deposits, net terms and the chase ladder behave once you are running several of these at once. Some editors request payment prior to delivery (of work), or to tie payment to specific milestones (such as the first draft and final delivery). Choose one option and make sure you document it.
3. Late charge and ability to halt production. The template imposes a late charge of 1.5% monthly (the legal limit if less than this) on all outstanding invoices, and allows the editor to suspend production until the outstanding amount is paid. The statutory limits on late charges vary by jurisdiction, therefore verify them in your area of operation.
4. Delivery of final files only upon full payment. Only delivering final files to the client upon receipt of full payment provides leverage where it should be. Additionally, it aligns with the next section, IP clause.
One important legal consideration if working with clients based in New York State: if the work is valued at eight hundred dollars ($800) or more, the Freelance Isn’t Free Act applies. Read that threshold carefully: the $800 is the total of everything you bill that client across the preceding 120 days, not the value of one job performed inside 120 days. Three $300 edits for the same client in four months clear it; one $1,000 edit running six months does not fall outside it. As outlined in Foley’s summary of the Act, a written contract for freelance services must contain the name and mailing address of each party, an itemized description of services provided along with their respective values, the agreed-upon rate and form of compensation, the date of payment or how said date shall be determined, and the date by which the freelancer shall submit to the client an itemized list of services provided. Absent a specified payment date in writing, payment is considered due within thirty (30) days of completing the services. While the template includes provisions meeting those requirements identified in Seyfarth’s summary of the Freelance Isn’t Free Act, statutes relating to contracts may vary depending on the location/jurisdiction involved; therefore, it is recommended that you familiarize yourself with any applicable laws.
Kill Fee
A kill fee represents a predetermined sum payable by the client should they terminate the engagement. An editor reserves time during an engagement. If you reject alternative work to undertake a two week assignment and the client terminates on day three, you would have lost money that could have otherwise been earned.
A well-written kill fee clause contains three elements:
- Work already completed, at the contracted-for rates.
- A percentage of the remaining balance which grows as the project develops.
- Expenses previously incurred (e.g., licensing fees that cannot be refunded).
The template states that twenty-five percent (25%) of the remaining balance is payable if terminated prior to submission of the first draft, and fifty percent (50%) thereafter. These figures represent initial suggestions rather than industry standards. Beancount’s Guide recommends using twenty-five percent (25%) of the total project cost as a baseline prior to beginning work, with additional payments to complete work and twenty-five to fifty percent (25%-50%) of the remainder as work proceeds. SitePoint’s Frequently Asked Questions similarly indicates that kill fees “are generally somewhere between 25% and 50%” of a total project cost. In either event, this is simply guidance provided by publishers, not law.
Consider how the deposit relates to the kill fee. The template stipulates that the deposit shall be applied towards what remains owing under the kill fee, and that whichever is larger shall remain with the editor. Beancount’s Guide expresses similar views stating that whether the deposit is applied against the kill fee or retained separately should be explicitly stated in the contract, noting that applying it is simpler to justify.
There is another way to protect yourself in relation to termination: in terminating an engagement under the template, the client agrees that the kill fee constitutes a reasonable estimate of lost opportunity, not a penalty. Courts in certain jurisdictions examine whether a cancellation fee was intended to serve as a reasonable estimate or as punishment, therefore retain reasonableness in mind.
For you as a client, a kill fee does not constitute a snare. Rather, it establishes a predictable cost associated with flexibility.
Intellectual Property Transfer

The most frequently asked question by clients, and misanswered by freelance editors, is ownership of the finished video. Below is the foundation of that, according to the U.S. Copyright Office Circular (2018) regarding works made for hire. A commissioned piece from an independent contractor qualifies as a work made for hire only if it falls under one of several categories. As a part of a motion picture or other audio-visual work is one of those categories; however, there needs to be a written agreement. The work cannot simply say “work made for hire” in an e-mail; it must specifically identify the work as being made pursuant to a commission and both parties must sign it. Therefore, without a contract that includes both a signature from the client and the editor, the editor generally retains the copyright to the edits she creates for a client, regardless of her receiving payment.
The template provides layered intellectual property protection:
- An assignment of the copyrights upon completion of payment for all invoices.
- A provision stating no license prior to payment. Drafts will only be approved internally until such time as the last invoice is paid.
- Optional work-made-for-hire language. Only applicable where allowed by law, this provides the designation for audio/visual works, with assignment as a secondary means of protecting the editor’s interests.
- Provision that editor materials remain with the editor. Templates, presets, LUTs and workflows are not turned over to the client; however, the client does receive permission to utilize these items in conjunction with the deliverables.
- Provision that client materials remain with the client. Stock footage, scripts, logos etc., will always remain owned by the client.
- Provisions for third-party assets. Music, stock video/footage and fonts will adhere to their own licensing requirements.
- Portfolio rights. The editor may provide examples of the project(s), except as otherwise agreed upon in writing by the client.
Safeguarding Confidential Information: Structuring a Firm Freelance Agreement and Dispute Resolution
While relatively short, these provisions are important when things go wrong.
Confidentiality. Editors have access to unreleased footage, launch dates, scripts, pricing and sometimes login credentials. This provision establishes a reciprocal obligation for confidentiality between the parties. It outlines typical exemptions for previously public information, previously known information, independently developed information and/or required disclosure. It also identifies subcontractors. Any subcontractor shall only be permitted to perform services under this agreement as provided in Schedule A and shall be subject to substantially similar obligations of confidentiality as stated herein. The default term is three years subsequent to the end of this agreement.
In a professional freelancer contract, strict non-disclosure protections guarantee that neither party will disclose proprietary business plans or trade secrets to any unapproved other party without express prior written consent. Establishing an integrated entire agreement clause confirms that the written text supersedes all prior verbal conversations, clarifying that the creative contractor is not an employee. For independent professionals handling sensitive brand footage, aligning every single item of project details with systematic project management protocols ensures total accountability throughout the entire post-production timeline.
Termination. There are two ways to exit a contract:
- Termination for convenience. Written notice (seven days). Kill fee applies if terminated by the client.
- Termination for cause. Immediately. Breach and failure to cure within seven (7) days. The template defines non-payment as material breach.
Upon termination, paid-for work is delivered, outstanding amounts are resolved, and confidential material is returned or deleted upon request. Provisions included in this agreement that survive termination include payment, kill fee, IP and confidentiality.
Using the Template
Below is an easy-to-follow guide to completing the template:
1. Save a master copy and create a working copy. Maintain an unchanged version.
2. Fill in the parties and Schedule A first. Most of the work involves names, addresses, deliverables/specifications/dates/fees.
3. Determine your numbers. Select your number of revision rounds, deposit percentage, payment terms, late fee and kill fee. Replace defaults [ ] in brackets with your preferred choices.
Setting those numbers is only half of it; the conversation around them is the other half, which we cover in how to manage client expectations on video projects.
4. Complete the Brand File. Schedule A5 is a written style reference guide: logos, colors, fonts, caption and pacing style, music preferences, reference videos and a do-not-use list. It maintains consistency among all future projects edited by anyone involved in said project and serves as a reference rather than a guarantee that any single person will edit.
5. Determine your IP option. Decide whether you want to retain the optional work-made-for-hire language dependent on your jurisdiction and lawyer’s advice.
6. Include governing law. Enter your state/country name along with how disputes are to be resolved.
7. Review and sign. A brief legal review is less expensive than one unpaid project. The contract should be signed prior to commencing work.
FAQ
Must I have a contract for my small video editing job?
Yes, even for a short video editing project. The contract should address scope, price, revisions, payment dates and ownership; and depending on your location or type of engagement it may require a contract to protect both parties under law. For instance, New York’s act requires a contract for any engagement valued at $800 or higher.
How many revisions should I allow for a video editor?
Typically two rounds of revisions are considered adequate for standard edits; additional rounds beyond two can be charged at an established rate per round. Some short cuts-down may only need one round while complex film productions may need three or more rounds; what matters is establishing clearly defined rounds and caps.
What is a suitable kill fee?
Content publishers recommend published guidelines ranging from approximately twenty-five percent (25%) to fifty percent (50%) of the project value or outstanding balance in relation to the amount owed to the editor at the time of cancellation. These percentages represent recommended levels for content publishers; they are not legal standards.
Who owns the video once the project is complete?
It depends on the contract entered into by the parties involved; absent a contract providing transfer of rights, typically ownership remains with the editor.
What if I stop hearing from my client?
This template permits shifting delivery dates if you are delayed because of delays caused by your client; permits you to schedule new delivery dates after a specified period of time elapses since the original delivery date was missed. An overdue invoice also gives you the ability to suspend work on your behalf and assess a late fee against your client.
Will this template serve as legal advice?
No. The template represents a starting point for creating your own agreements; laws pertaining to contracts, late fees, work-made-for-hire status and freelancer protections differ significantly from state to state and country to country.


