Safety Training Video That Workers Watch and OSHA Accepts

Share
Share
Share
Share
Safety Training Video That Workers Watch and OSHA Accepts

Table of Contents

Table of Contents

EHS managers are not dealing with a content issue. Their issue is creating a customized version of their hazard mapping. The off-the-shelf libraries have pretty clean coverage of HazCom, Fall Protection, Lockout/Tagout. However, they cannot provide a catalog listing of your particular catwalk on your mezzanine, the chemical that your manufacturing process employs but no generic vendor will film, or the SOP written three years ago by your senior technician that none of the other technicians can even recall let alone explain. This guide provides guidance on what OSHA really wants out of safety training, where video fits in this context, what types of videos should you purchase “off the shelf,” and when producing a custom video based on your site-specific requirements makes sense. We work with both EHS and L&D teams weekly around the middle ground, so there is an honest bias towards that.

Where video fits in providing compliance with OSHA Safety Standards

Safety Training Video That Workers Watch and OSHA Accepts - figure 1

OSHA divides its standards into two major categories; General Industry, 29 CFR 1910, for all facilities involved in manufacturing, warehousing and healthcare services; and Construction, 29 CFR 1926, for all activities related to the actual construction of buildings, demolitions and scaffolding. If you operate a facility that does both, then you must comply with the strictest regulations for each identified hazard.

Video is merely a means of delivering information. It is not the training. All standards require demonstration of competence along with instruction. To illustrate fall hazards, the regulation requires that employees be instructed in the type of fall hazards present in their work environment and how to identify those hazards (American Training Resources), which is something a video can accomplish effectively. The hands-on aspects of such training (e.g., ladder inspections, donning a harness, selecting an anchor point), however, must be evaluated by someone who signs off on the employee’s proficiency.

There are several high frequency regulatory requirements that are important to remember:

  • HazCom (1910.1200 / 1926.59): Training on chemical hazards, SDS access and the labeling system at initial assignment, and again whenever a new chemical hazard enters the work area. Note that 1910.1200 itself sets no annual refresher – a yearly cycle is common practice, not a federal requirement.
  • Fall Protection: Subpart D applies to general industry at 4 feet; Subpart M applies to construction at 6 feet. Rescue plans also apply to this subpart.
  • Respiratory Protection (1910.134): Fit testing at least annually, and again whenever the facepiece changes. The medical evaluation is required before first use and is not an annual repeat – it is redone only when symptoms, a supervisor or PLHCP recommendation, or changed workplace conditions trigger it.
  • Powered Industrial Trucks (1910.178): Each forklift operator must undergo site-specific evaluation every three years.
  • Confined Spaces (1910.146 / 1926 Subpart AA): Permit issuance, atmospheric testing, rescue planning.
  • Lockout/Tagout (1910.147): Site-specific training for new machinery/processes or changes to existing ones.

Documentation is equally important to verification. In order to document whether employees completed the training and signed off on their ability to perform tasks safely, most Learning Management Systems (LMS) platforms track completion timestamps, quiz scores and attestation signatures. These records are what an OSHA inspector will ask for during a visit if an injury occurs at your facility.

If you are beginning from scratch regarding video production, I’ve outlined our approach to producing training videos as it relates to compliance issues in general, including safety training.

The eight categories of hazards that every L&D team should create a catalog of videos for

Once you begin developing your compliance video catalog, consider identifying the hazards present at your location and relating those hazards to each job function. Although many hazards are common to multiple positions (e.g., HazCom, PPE, ergonomics) other hazards may be unique to certain job functions (e.g., LOTO for maintenance personnel, traffic patterns for forklift operations, repetitive motions for picker/packer).

Categories that nearly every commercial facility has included in their safety training library:

  1. Fall Protection: Accessing roofs, working on ladders greater than 4 feet, working from scaffolds, working on mezzanines.
  2. Confined Space: Tanks, vaults, sumps, silos or any confined space that restricts entry and poses atmospheric hazards.
  3. Hearing Conservation: Establishing baseline audiograms for any position exceeding 85 dB Time Weighted Average (TWA).
  4. Hazard Communication: Providing SDS access and label comprehension training.
  5. Personal Protective Equipment Selection & Use: Eye protection, hand protection, foot protection, head protection, respirator protection, fall protection.
  6. Lockout/Tagout: Procedures for isolating energy on individual machines or for groups accessing shared equipment.
  7. Ergonomics: Proper lifting techniques, repetition reduction techniques and workstation design.
  8. Mental Health and Psychological Safety: More recently falling within the domain of EHS, particularly in healthcare and construction sectors. Employee stress recognition and reporting mechanisms as well as peer support resources.

Hazard category

OSHA standard

Best video format

Fall Protection

1910 Subpart D / 1926 Subpart M

SME walkthrough + on-site demonstration

Confined Space

1910.146 / 1926 Subpart AA

Procedural shoot with entry/rescue footage

Hearing Conservation

1910.95

Short explainer + audiogram process walkthrough

Hazard Communication

1910.1200 / 1926.59

Off-the-shelf awareness module

PPE Selection & Use

1910.132–138

Equipment-specific demonstration video

Lockout/Tagout

1910.147

Site-specific procedural video per machine type

Ergonomics

General Duty Clause

Off-the-shelf technique video

Mental Health & Psychological Safety

General Duty Clause

Interview-style awareness video

As mentioned earlier, mental health was traditionally a Human Resource issue. With increasing emphasis on workplace psychological safety within EHS, meetings, near-miss reporting, and workplace psychological safety video assets are still relatively rare in most off-the-shelf compliance video libraries.

If you are using corporate training video formats for non-compliance areas that have overlapping elements (data privacy, sexual harassment, etc.), these formats serve a similar purpose in the larger L&D rotational framework.

Off-the-shelf library vs. on-site custom video production for safety

Below are the guidelines we provide our EHS leads if they inquire about these. Off-the-shelf libraries get their value from being used to train employees on hazards that are generic and federally standardized. Custom produced videos get their value from being utilized to train employees on hazards that are site-specific, including equipment and workflows. For most organizations, this means using both.

Purchase an off-the-shelf library for:

  • Hazard communication (HazCom) basics, GHS pictogram literacy, SDS navigation
  • Introduction to general PPE (safety glasses, hearing protection, hard hats)
  • Use of fire extinguishers (the PASS method)
  • Awareness of slip/trip/fall hazards in offices and warehouses
  • Awareness of bloodborne pathogens (1910.1030)
  • Defensive driving practices for fleet personnel

Create a customized video for:

  • Lock out/tag out sequences for your specific machines, with your specific lockout locations shown on-camera
  • Evacuation routes through your facility shown on-site
  • Proprietary chemical mixes unique to your process
  • SOPs developed by your senior staff that vendors never produce on-camera
  • Entry procedures into confined spaces at your tanks and use of your rescue equipment
  • Emergency responses for your specific equipment (presses, robotics, cryogenic systems)

What teams often fall into: paying $5k to $10k annually for a generic off-the-shelf library (Atlantic Training) and assume the generic library addresses site-specific risks simply because it is costly. It does not. The library provides training for the federal standard. Your company-specific emergency response plan, your ladder, your forklift attachment which your operators utilize, require filming done by a videographer within your building.

Budget allocation considerations for a 200 person manufacturing operation:

$5k to $8k annual subscription to an off-the-shelf library.

Custom production costs approximately $15k to $40k every two years. Roles, equipment, and chemicals change frequently. Custom-produced video content also requires regular updates.

Best workplace safety training video providers

Safety Training Video That Workers Watch and OSHA Accepts - figure 2

Some notable off-the-shelf providers in 2026 and some of what each does well.

OSHA video library. This is the best option to consider first. No cost, public domain, no subscription required. Provides a good amount of basic information regarding common OSHA-related issues such as falls, trenches, and machine guards. Quality of production varies greatly due to the fact that many of the videos were created over several decades. A good choice for awareness-level content. Searching here prior to purchasing elsewhere can be beneficial.

Labor & Industries libraries. Washington L&I, Oregon OSHA, and California OSHA all offer free safety video libraries. Much like the federal OSHA library, the mileage varies among these libraries. Some state libraries have construction-based content that may not be included in the federal library.

SafetyHub. Offers streaming content with an annual fee of $795 for 300+ titles or $995 with their learning management system (LMS) package. Costs per employee range from $1 to $6 per employee per month. Content is designed as micro-learning style sessions typically lasting between five and seven minutes. Suitable for monthly safety meetings.

J. J. Keller Training. Catalog includes DOT, OSHA, HR training. Pricing is per course versus subscription model pricing which tends to be more expensive. Standardized content for the trucking and transportation industries.

Atlantic Training. Flat fee subscription model. Seeks to differentiate themselves from competitors offering pay-per-view models as providing a “predictable budgeting option.” Good all-around library for industrial settings.

SafetySkills. LMS-focused platform priced at $18/month per organization. More useful when assembling courses utilizing your own video content rather than relying solely upon video content.

XO Safety / American Training Resources / National Safety Council. Industry-specific libraries offering additional depth in areas of concern such as trenching, electrical safety, workplace violence. May be worth reviewing after identifying gaps in your primary library.

No preference exists for one vendor over another. The best library for your operations will depend on your industry, LMS system(s) utilized and level of site-specific content added on top of the library. Recommendations: trial two or three libraries prior to purchase utilizing free previews, run the trials through your safety committee and choose based on depth of coverage within your high risk categories.

Developing a site-specific safety training video

The complete end-to-end custom production playbook that we use at Vidpros. Use this as a budget and process guide to work from and not the only way to develop a site-specific video.

Step 1: Hazard mapping & pre-production. This will be a 2 week phase. We will sit down with your safety person and one or two subject matter experts (SME) and map out all of the hazards you would like to cover related to the equipment, location and job role that will be involved in the video. This is also where we draft the talent release forms, create a schedule for shooting during production times, confirm PPE for any on-camera workers and conduct a site walk prior to bringing cameras onto your site.

Step 2: SME interviews. On-site one-day interview session. We will have your senior technician(s), line lead(s) and EHS personnel explain the hazard, the procedure and the failures they have witnessed while performing their duties. The footage obtained from these interviews represents the heart of a site-specific video. A vendor narrator reading from a scripted video cannot replace someone saying, “I’ve lost count of how many guys I’ve seen lose their fingers on that press… here’s how it happened… and here’s what we did.”

Step 3: B-roll & procedural shoot. Depending on the scope of your project, this could take anywhere from one to three days on your site. We will obtain footage of the actual equipment, perform the correct SOP procedures with the correct PPE and capture actual examples of proper PPE usage. Remember, PPE on camera needs to represent actual practices. If your facility requires a fall arrest harness for anyone working on that catwalk, the operator should wear one. Footage that does not follow established practices can never appear in a training video, regardless of whether it’s intended to illustrate a point or not.

Step 4: Post-production. Approximately 3 to 4 weeks. Creating a final edit of the raw footage captured in steps 1 through 3; creating voiceover and overlaying your standard operating procedures (SOP); adding on-screen labels for energy isolation points, motion graphics for areas containing hazardous materials, closed captions, any necessary language tracks and music that has been properly cleared for licensing purposes. All of the necessary paperwork and licenses will be handled by us as part of delivering your completed video.

Step 5: SME review & legal review, then delivery. Approximately one to two weeks. Once the final cut of your video has been created, your safety lead and counsel review for accuracy and risk-related statements contained within your video. Upon approval of both parties, your video will be delivered in formats compatible with your learning management system (LMS).

In total, developing a single eight to twelve minute module takes approximately six to ten weeks from start-up to delivery. The cost associated with producing such a video will depend upon several factors including number of days spent shooting, languages supported in the video, animation complexity etc., and may range from $12,000 to over $35,000.

For companies interested in developing shorter modules in-house utilizing existing company footage, our how to make a training video walkthrough provides information regarding the in-house development workflow.

Document retention requirements & tracking metrics

As it relates to OSHA documentation requirements, those requirements are easier to understand than to accomplish. You must provide proof that an individual received training; when he/she received training; on what topic they were trained; and that he/she demonstrated comprehension of the material.

A minimum set of documentation requirements include:

  • Employee name and employee ID #
  • Training date and topic
  • Trainer name (or unique identifier for video module and version)
  • Employee attestation signature (or completion status recorded via LMS)
  • Quiz score (if used to measure comprehension)

The timeframes for retaining documents vary. For example, OSHA sets no federal retention period for HazCom training records as such. The long clock comes from 1910.1020: employee exposure records are kept 30 years, and employee medical records for the duration of employment plus 30 years (training requirements themselves are set out in OSHA 2254). Records related to bloodborne pathogen training must be maintained for three years. In general, most employers maintain records of training for a period of three to five years. Longer timeframes may exist if required by regulatory bodies in states.

Training cadences that are worth recording on a calendar: HazCom, every year. Lockout/tagout, anytime new machines, processes, or employees affect lockout/tagout procedures. Forklift operator certification, every three years, plus immediately following any near miss or incident. First aid/CPR certification, typically valid for two years, plus any additional medical evaluations deemed necessary; see our CPR and first aid training video page for how we approach that one. Respiratory protection fit testing, annually, plus any additional medical evaluations deemed necessary.

Beyond compliance measures, track quiz scores by topic to determine which modules require improvement. Track near-miss reports tagged to category to identify gaps in training. Track the amount of time it takes employees to complete refresher training to identify employees who are due for a refresher.

Accessibility and language requirements for workplace training videos

WCAG 2.1 AA, ADA Title III, and other disability-accessibility laws set minimum expectations for accessible training. This means that your required workplace training videos must be “perceivable” to deaf and hard-of-hearing employees. To achieve this, it is recommended to provide accurate closed captions, not automated captions which frequently misrepresent technical terms.

Production decisions regarding accessibility and languages include:

  • Closed captions: Burned into the video versus a sidecar (.srt or .vtt) caption file. Since employees using screen readers and/or preferring to view the transcript prior to viewing the video can resize and change contrast levels of the captions within their Learning Management System (LMS) player, sidecars are preferred and meet accessibility requirements better than burned-in captions.
  • Transcript files: Separate files containing the transcript of the video. Used by both screen reader users and those wishing to preview the material prior to viewing the video.
  • Audio descriptions: Narration describing visual elements of the video for employees who are blind. Federal contractors are required to provide audio descriptions for certain types of videos (e.g., videos depicting procedures or processes).
  • Interpretive tracks: Picture-in-picture windows with American Sign Language (ASL) interpreters. Commonly used in healthcare and government training settings. Typically increases production costs ($1,500 to $3,500 per module average).
  • Multilingual audio: Frequently Spanish is recorded as a secondary language in U.S. industrial workplaces. Typically, we will create a script recording session twice using the same on-camera subject matter expert (SME) or voice talent. Many operations also require additional language tracks such as Vietnamese, Polish, Tagalog etc. based upon their workforce.

For healthcare clients, accessibility overlaps with HIPAA-aware production practice, which we cover in a separate guide on HIPAA training video production.

Refreshing existing safety video content following an incident or regulatory change

Factors that indicate a need to revise or update existing safety modules include:

  • A reportable incident involving a hazard depicted in the safety video
  • Near miss incidents with the same type of hazard shown in the safety video, specifically if the existing safety training did not adequately depict or describe the failure modes associated with the hazard
  • Changes in Occupational Safety and Health Administration (OSHA) regulations affecting the described procedures (silica, beryllium, walking-working surfaces have all caused recent updates)
  • Modification to equipment that impacts the necessary energy isolation, guarding and/or personal protective equipment (PPE) requirements
  • The subject matter expert (SME) featured in the video has changed positions or left employment, resulting in diminished credibility
  • Shift in workforce demographics creating a need for additional languages in safety video production

In addition to these factors, there are times when a company may want to refresh their safety modules as part of their normal business cycle. While not as frequent as other operational activities, updating safety modules provides opportunity for improvement in communication clarity and effectiveness.

Post-incident refresher: after an incident that resulted in injury or fatality, one of the first things organizations consider doing is to develop and distribute a revised version of the relevant safety module. However, rather than adding new procedures to the current version as an appendix, companies should consider rewriting the entire module to reflect the updated procedures in a consistent manner throughout. Employees tend to remember steps they take and follow procedures consistently; however, rarely do they recall appendices or attachments.

Additionally, while revising safety modules periodically provides opportunity for refreshing the testimonial provided by SMEs as well as providing an opportunity to replace dated footage with new footage, we recommend updating critical safety modules approximately every 18 to 24 months regardless of whether there was an incident or regulatory change. Additionally, since most LMS systems assign a unique ID number to each module created within its system, re-cutting a module results in a clean reset of refresher tracking for employees.

Companies that utilize more extensive branching scenario-type interactive safety training (decision trees, simulated environments, etc.) may want to refer to our interactive scenario-based safety training page for further information.

FAQs about creating custom safety training video modules

Does a safety video alone satisfy OSHA training requirements? No. Most OSHA standards require demonstration of competence beyond just instructional content. Companies typically treat video as a classroom segment of overall training programs requiring demonstrated proficiency evaluation by trained personnel.

How long should a safety training video be? Eight to twelve minutes per topic for major subjects. Three to five minute microlearning versions for refresher updates. Longer than 15 minutes tends to reduce retention, particularly on mobile devices.

What would be considered a reasonable budget range for producing a customized safety training video? A total budget of $12K to $35K for an eight-to-twelve-minute module covering a particular hazard at a specific location. Smaller budgets possible if existing footage can be utilized and larger budgets possible if multi-language tracks or animation are desired.

Can we use OSHA’s free video library and then declare compliance complete? Yes, if you need awareness-level content on general federal hazards (i.e., electrical shock). No, site-specific hazards including your equipment, chemicals and facility layouts cannot be met solely with OSHA’s free library.

Do on-camera employees need to sign releases? Yes. Any identifiable individuals on-camera sign talent releases allowing you to use their image in training videos internally and externally.

What file formats are acceptable for upload into our LMS? Most LMS platforms accept MP4 files encoded at 1080p resolution with H.264 codec. SCORM packaging is generally required for completion tracking and integrating quizzes within many enterprise LMS systems. Verify with your LMS administrator before finalizing delivery.

When should we update existing safety training videos? Typically every eighteen to twenty-four months unless a regulation change, incident, or equipment modification necessitated changes in procedures. Annual review of your catalog to identify areas needing revision.

Must we produce a separate video for each language supported by our organization, or can we simply use subtitles? Using subtitles satisfies accessibility requirements. Using native-language audio enhances comprehension and demonstrates respect for your workforce. In high-risk applications (lockout/tagout, confined space entry, fall protection systems), production expense for Spanish or Vietnamese language tracks is normally justified due to increased retention rates.

If your hazards are site-specific enough that a $795-per-month streaming service does not cover all of your hazards, book a Vidpros consult and our staff will assist you in developing custom safety training videos that sit alongside your generic library offerings and comply with recordkeeping requirements. Please send us a list of hazards not covered by generic libraries and we will prepare a project plan for production based on your facilities, equipment, and schedule.

Vidpros $100 first-week trial: 10 hours of professional video editing

About the Author

Mike

Michael Holmes is the founder and CEO of Vidpros, a trailblazer in video marketing solutions. Outside the office, Michael nurtures a growing community of professionals and shares his industry insights on the blog.

Find This Helpful?

Join the Vidpros community! Subscribe to our newsletter for cutting-edge strategies, expert social media insights, and exclusive offers to elevate your video production and marketing skills—delivered straight to your inbox.

*By submitting, you agree to receive emails from Vidpros and to our privacy policy.

Related Articles

Stay Inspired

Get in on the insider's loop with Vidpros! Sign up for our newsletter to snag exclusive insights, top-tier video marketing tactics, and special perks reserved for our community members.

By connecting with Vidpros, you’re opting into a stream of inspiration and our privacy policy.

A person with long black hair, wearing a maroon blazer and white shirt, sits cross-legged with a laptop on their lap, smiling at the camera. This content creator exudes confidence against the plain background.